slots

There aren't any slots available until next month.

在下个月之前都没有空位。

There are a number of thoughtful slots and pockets for storing things, including a lighted glovebox.

，乐骋有若干深思的储存物品空间，包括一个浅的手套箱。

He's been given a regular ten-minute slot on the radio.

电定期给他十分钟的节目广播时间。

Can you slot her into a job in the sales department?

你能把她安排在销售部工作吗?

Put a coin in the slot.

将硬币放入投币口。

When we got the final result of our experiment, everything slotted into place.

们得到了试验的最终结果，一切都吻合。

If you put a coin in the slot of this machine, stamps come out of another slot.

如果你把硬币放进这的一个投币口，邮票就会从另一个口里出来。

The programme of "front benching pilot tunnel divisional and laminated skewed slot construction" was created.

独创了“正阶导硐分部分层斜沟施工方案”,该方案具有好的推广应用价值。

It is an important problem to indicate the maximum displacement coefficient ingear slotting tool design process.

确定最大变位系数是插齿设计的一个重要问题。

Please comment whether it's cabrite's skin or fishskin?Good sword!I have one with slot at one side!

请教是藏蜥蜴皮还是鱼皮?好!有一把是单面开槽的!

To predict the slot film-cooing adiabatic effectiveness, a mathematic model was developed based on cohence non-isothermal jet theory.

摘要在伴随非等温射流基础上发展了一种适用于缝槽气膜冷却绝热温比预估的数学模型。

Needle slot on the neilsbed armor plate is usually milled one by one by milling machine controlled manually.

针床钢板上的针槽通常是由人工控制用铣床一条条铣出来的，费工费时，铣槽精度低。

This paper mainly discusses subjects such asprocessing,technology of pole coil wind ing,forming,manufacturing lead,punching,dove-tail groove,insulating,heat pr essing,encircling slot,etc.

本文主要研究了磁极线圈绕线、整型、引线制做、鸽尾槽冲制、绝缘、热压、围带槽加工工艺等方面内容。

The toolholder is used for outer slotting and the tool bar for inner slotting and for slotting the keyway.

床附有电磁自动抬的架和杆。架用天外插削，杆用于内插削和插键槽。

The main component of knitting slot machine is "neilsbed" and there are lots of minute needle slots used to place needles.

针织槽的主要部件为“针床”，长方形针床钢板（针板）槽间开有许多细密的“针槽”，用于安装放置“织针”。

Stepped and staggered sidecutter is the special miller for machining root rotor slot by Beijing Beizhong Steam Turbine Generator Co.

阶错齿三面刃铣是北京北重汽轮有限责任公司加工叶根转子槽的专用铣。

Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.

通过在与进料方向平行的底部底板上铣出一个狭槽来实现压床上模具中心的调整。

Compared with the conventional presplitting methods, the shaped charge is obviously more effective in presplitting blasting and especially useful in controlling the presplitting slots.

聚能预裂爆破与普通预裂爆破相比,爆破效果明显提高,能有效地控制预裂缝的扩展。

Fitting is used for autobicycle start electrical machiney, Car forced convection air heater, Electric tool electrical machiney waits for miniature electrical machiney rotor slot insert empire paper.

适用于摩托车起动电、汽车暖风、电动工具电等微型电转子槽插入绝缘纸。

Each frame to doors fitted with a mortice lock is to be slotted for bolt, correctly positioned and to have a mortice cap welded on at back of perforation.

为匹配安装暗锁的门，每个框要为锁舌开槽，通过在其后打孔，在槽内焊接榫帽，使其正确就位。