1.A new type of burnt lime slaker have been developed by LAIGANG sintering plant.
莱钢结厂研制了一种新型的生灰消化器。
2.Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.
将聚四氟乙烯树脂在常温下用模压法成型后再经高温结制成。
3.The process conditions,including presintering temperature,sintering temperature and time,cooling mode and pretreatment were studied.
对成过程(预温度、结温度及保温时、降温方式)及预处理工艺进行了研究。
4.Modified polyacrylic acid aqueous vehicle may be the headmost applied in electronic pastes of high sintering temperature.
其中改性聚丙烯酸将有可能在高温电子料中率先应用。
5.Sinter type fastigiate-handle drills:Use for drilling hard and brickle material,...
简 介: 结锥柄钻头:适用于玻璃、陶瓷等硬性材料的钻孔。
6.A white powder,coarse particles and mealiness ,hardly souble in acidic or alkaline solutions,with stable chemical property and good sintering performance.
外观呈白色粗颗粒或微粉状两种,难溶于酸或碱液中,化学性能稳定,具有良好的结性能。
7.The author introducd the electric equipment design of ore smelting eutecticum engineering of ore sintering plate, stated the problemes and the countermeasures.
介绍了冶共晶工程结的电气设计,并阐述了设计遇到一些问题以及解决的方法。
8.Addition of partial nephelite during bauxite sintering could not only make up consumption of soda, but also attain purpose for treating nephelite.
在铝土结过程中添加部分,以补充碱的消耗,同时达到处理的目的。
9.The effects of sintering parameters on the shear and bond strength of ceramet friction material were studied and its fracture morphology was observed and analyzed.
研究了结工艺参数对金属陶瓷摩擦材料抗剪强度和金属陶瓷摩擦片结合强度的影响,观察并分析了断口形貌。
10.Using dolomite and sinter magnesia clinker as a main material and added with alkali metal phosphate binder and additives,amagnesia-calcia coating material has been developed.
采用白云配以适量的镁砂熟料和磷酸盐结合剂及复合外加剂研制出了具有较好性能的镁钙质中包涂料。
11.The color of the products is argent grey metallic shine, smooth, unknit. They mustn't be oxydic badly, lacking of sintering, over heating, delamination and cracking.
产品表面呈银灰色金属光泽、光滑、平整、不得有严重氧化现象,不得有欠、过熔、鼓泡、分层、裂纹等缺陷。
12.The obtained achievement in building material industry is studied, including sintering cement with substituting coal by cokeite and smelting rockwool with substituting coke by cokeite and so on.
13.The metal reflet glaze samples were prepared with the Huxian wheat-meal-stone accession 0%, 5%, 10% and 15% according to the traditional metal reflet glaze formula and then sintered at 950%.
14.For sinter with 25% and 50% MAC fines the iron oxides mainly consisted of hematite and magnetite, the bonding phase were mainly dicalcium silicate, glassiness, and a few amount of calcium ferrite.