martensite

The high wearing resistance of the samples after hydrocooling and air cooling was partially attributed to martensite transformation and work-hardening.

经水冷和空冷的有性的重要原因是其在损过程中诱发了马氏体相变,出现加工硬化现象。

It was reported that the detwinning stress in martensite of Ti-Ni alloys increases with increasing annealing temperature, but the reason for such a strange behavior has remained unclear.

有报道称Ti-Ni合金的去孪晶应力随着退火温度的升而升，但是造成这一现象的原因并不清楚。

It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.

文章认为，粗大的马氏体组织、晶界碳化物以及沿晶界分布的“第二相”组织是促使马氏体不锈钢产生裂纹的主要原因。