1.Soot is the product of the imperfect combustion of fuel.

1.煤烟是料不完全烧的产物。

2.These results are instructively important for determining combustion heat safely.

2.这些结果对安全地测定烧热具有指导意义。

3.Soot is usually the product of the imperfect combustion of fuel.

3.煤烟通是料不完全烧的产物。

4.Usually a gas cooler is used between the combustion chamber and hydrator.

4.通烧室和水合器之间设置一个气体冷却器。

5.A model of pyrotechnical combustion products was established based on the principle of minimum free-energy.

5.烧产物的预测对烟火药的设计非重要。

6.The paper discusses the calculation and its property of the rate of combustion heatrelease for prechamber diesel engines.

6.文章讨论了予室柴油机的烧发热规律的计算特点和方法。

7.Reference on step conversion of coal gasification and carbocoal combustion is offered by the research on pyrolysis carbocoal.

7.热解半焦的研究为煤气及半焦烧的分级转技术提供了参考。

8.Sugariness is in digestive process, if the word because of without complete combustion corruption, will become lactic acid.

8.糖质消的过程中，如果因为没有完全烧而腐败的话，将会变成乳酸。

9.All the results can be used to validate the autoignition and combustion models of homogeneous mixture in vitiated coflow.

9.为活热氛围下液体料自及烧模型的建立奠定了基础。

10.The technigue of staged coal combustion in underplate burning boiler is a mew method for energy saving and environment protecting.

10.层炉两段烧技术,是一种行之有效的节、的新技术。

11.Besides, laser optoacoustic spectroscopy technique and laser mass spectrometry will play more important role in research of internal combustion engine.

11.另外，激光光声光谱技术、激光质谱仪等有望内机的研究中发挥更大的作用。

12.The influence of afterburning chamber length on secondary combustion efficiency and flow field were analyzed based on direct-connected ground simulation test.

12.结合直连式地面模拟试验,分析了补室长度对掺混流场和二次烧效率的影响。

13.Preliminary test of combusting property of COWS showed that this kind of synfuel had a good combustion behavior, and high combustion efficiency.

13.烧性实验表明，三元料浆的烧性良好，烧效率高，是一种工业应用前景广阔的浆体。

14.The heat input of gasification using coalite as solid heat carrier comes from combustion heat of the solid heat carrier in riser.

14.固体热载体煤气的热量靠提升烧产生。

15.Three technology options including precombusfion capture,oxyen-fired combustion and postcombustion capture and their process flows for capturing CO2 are introduced in this paper.

15.文章主要介绍了3种CO2捕获技术:烧前捕获、纯氧烧、烧后捕获,并介绍了其工艺流程。

16.Multiphase flow is a new and developing discipline on the basis of hydrodynamics, heat and mass transfer, physiochemistry, combustion theory and other disciplines.

16.多相流是流体力学传热传质学,生物学,烧学等多学科的基础上发展起来的一门新兴学科.

17.Based on polytrophic process of air compression and isothermal gas combustion inside the turbine, an improved gas turbine with generality Carnot cycle is suggested.

17.基于气体多变压缩以及等温涡轮烧技术,提出了一种改进的概括性卡诺循气轮机,通过模型预测分析了其性,并与传统气轮机进行了比较。

18.The tribophysics of the cylinder liner—piston rings in an internal combustion engine is a typical tribological system with the reciprocating motion and the impacting motion.

18.内机缸套——活塞摩擦副系统是一个集往复、冲击于一体的典型的摩擦学系统。

19.Both numerical prediction and experiments signified that the new type flameholder has a bright prospect as a kind of high combustion efficiency and low pressure loss flameholder.

19.无论计算还是实验，都表明新型稳定器作为高效 低阻火焰稳定器是很有发展前景的。

20.This paper discusses the fundamentals and characteristics of catalytic combustion and the type of catalyst and approaches the way to apply the technology of catalytic combustion in cremator.

20.本文对催烧法的基本原理、特点及催剂的形式等方面进行了讨论,并就催烧技术火设备中实现的可方法进行了探讨。